Endress+Hauser Cerabar M PMC51 - Materials in Contact with the Process

Cerabar M PMC51, PMP51, PMP55
104 Endress+Hauser
A B C
5 4
2
1
2
3
1
2
3
1
A0028087
Item Component part A
Standard
1)
Armor for capillary
B
PVC-coated
Armor for capillary
C
PTFE hose
Armor for capillary
1 Capillary AISI 316 Ti (1.4571) AISI 316 Ti (1.4571) AISI 316 Ti (1.4571)
2 Flexible armor for capillary AISI 316L (1.4404)
2)
AISI 316L (1.4404) AISI 316L (1.4404)
3 Coating/armor - PVC
3)
PTFE
4)
4 Single-ear clamp - - 1.4301
5 Shrink tubing at capillary junction - Polyolefin -
1) If no option is specified when ordering, order option "SA" is supplied.
2) Product Configurator, order code for "Armor for capillary:" option "SA"
3) Product Configurator, order code for "Armor for capillary:" option "SB"
4) Product Configurator, order code for "Armor for capillary:" option "SC"
Materials in contact with the
process
NOTICE
‣
The device components in contact with the process are specified in the "Mechanical construction"
→  48 and "Ordering information" →  124 sections.
Delta-ferrite content
The delta- ferrite content of the wetted parts material can be guaranteed and certified to ≤ 3% if the
option "KF" is chosen in the Product Configurator "Material of the process isolating diaphragm"
ordering feature. When PMC51 with hygienic process connections is chosen, the deltaferrite content
can be guaranteed and certified to ≤ 1% if the option "KF" is chosen in the Product Configurator
“Material of the process isolating diaphragm” ordering feature.
TSE Certificate of Suitability (Transmissible Spongiform Encephalopathy)
The following applies to all process wetted device components:
• They do not contain any materials derived from animals.
• No auxiliaries or operating materials derived from animals are used in production or processing.
Process connections
• "Clamp connections" and "Hygienic process connections" (see also "Ordering information" section):
AISI 316L (DIN/EN material number 1.4435)
• Endress+Hauser supplies process connections with a threaded connection as well as DIN/ EN
flanges made of stainless steel as per AISI 316L (DIN/EN material number 1.4404 or 1.4435).
With regard to their stability-temperature property, the materials 1.4404 and 1.4435 are grouped
together under 13E0 in EN 1092-1: 2001 Tab. 18. The chemical composition of the two materials
can be identical.
• Some process connections are also available in alloy C276 (DIN/EN material number 2.4819). For
this purpose see the information in the "Mechanical construction" section.