Endress+Hauser Cerabar M PMC51 - Page 103

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 103
Connecting parts
1
5
2 3
4
4
6
6
1 9
5
7
8
A0023900
10
11
12
A0032952
Item number Component part Material
1 Connection between the housing and
process connection
AISI 316L (1.4404)
2 Mounting bracket Bracket AISI 316L (1.4404)
3 Screw and nuts A4-70
4 Half-shells: AISI 316L (1.4404)
5 Seal for cable from separate housing FKM, EPDM
6 • Gland for cable from separate housing:
• Screws:
• AISI 316L (1.4404)
• A2
7 PE cable for separate housing Abrasion-proof cable with strain-relief Dynema
members; shielded using aluminum-coated film;
insulated with polyethylene (PE-LD), black;
copper wires, twisted, UV-resistant
8 FEP cable for separate housing Abrasion-proof cable; shielded using galvanized
steel wire netting; insulated with fluorinated
ethylene propylene (FEP), black; copper wires,
twisted, UV-resistant
9 Process connection adapter for separate
housing
AISI 316L (1.4404)
10 Cell body AISI 316L (1.4404)
11 Connection between body of measuring cell
and capillary
AISI 316L (1.4404)
12 Heat-shrink tubing (available only if flexible
armor for capillary has PVC coating or PTFE
hose)
Polyolefin