EasyManua.ls Logo

Endress+Hauser Cerabar M PMC51 - Remote Operation

Endress+Hauser Cerabar M PMC51
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 111
Designation Option
1)
Chinese AK
Japanese AL
1) Product Configurator "Additional Operation Language" ordering feature
Remote operation
All software parameters are accessible depending on the position of the write protection switch on
the device.
Hardware and software for remote operation HART PROFIBUS PA FOUNDATION Fieldbus
FieldCare →  111
1)
2)
FieldXpert SFX100 →  111
NI-FBUS Configurator →  112
1) Commubox FXA195 required
2) Profiboard or Proficard required
FieldCare
FieldCare is an Endress+Hauser asset management tool based on FDT technology. With FieldCare,
you can configure all Endress+Hauser devices as well as devices from other manufacturers that
support the FDT standard.
FieldCare supports the following functions:
Configuration of transmitters in offline and online mode
Loading and saving device data (upload/download)
Documentation of the measuring point
Connection options:
HART via Commubox FXA195 and USB interface of a computer
PROFIBUS PA via segment coupler and PROFIBUS interface card
Service interface with Commubox FXA291 and ToF adapter FXA291 (USB).
For further information, please contact your local Endress+Hauser Sales Center.
Field Xpert SFX100
Field Xpert is an industrial PDA with integrated 3.5" touchscreen from Endress+Hauser based on
Windows Mobile. It offers wireless communication via the optional VIATOR Bluetooth modem from
Endress+Hauser. Field Xpert also works as a stand-alone device for asset management applications.
For details refer to BA00060S/04/EN.
Commubox FXA195
For intrinsically safe HART communication with FieldCare via the USB interface. For details refer to
TI00404F/00/EN.
Commubox FXA291
The Commubox FXA291 connects Endress+Hauser field devices with a CDI interface (=
Endress+Hauser Common Data Interface) to the USB interface of a personal computer or laptop. For
details refer to TI00405C/07/EN.
For the following Endress+Hauser devices you will need the "ToF Adapter FXA291" as an
additional accessory:
Cerabar M
Deltabar M
Deltapilot M
ToF Adapter FXA291
The ToF adapter FXA291 connects the Commubox FXA291 with devices of the ToF platform,
pressure equipment and Gammapilot via the USB interface of a personal computer or a notebook.
For details refer to KA00271F.

Table of Contents

Other manuals for Endress+Hauser Cerabar M PMC51

Related product manuals