Endress+Hauser Cerabar M PMC51 - Calibration; Service

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 123
Designation Option
1)
Customized pressure; see additional specification J
Customized level; see additional specification K
1) Product Configurator, "Calibration; unit" ordering feature
Calibration
Designation Option
1)
Factory calib. certificate 5-point F1
DKD/DAkkS calib. certificate 10-point
2)
F2
1) Product Configurator "Calibration" ordering feature
2)
Service
Designation Option
1)
Cleaned from oil+grease
2)
HA
Cleaned for oxygen service
2)
HB
Cleaned from PWIS (PWIS = paint wetting impairment substances)
2)
HC
Adjusted min alarm current IA
Adjusted HART Burst Mode PV IB
1) Product Configurator "Service" ordering feature
2) Only device, not accessory or enclosed accessory