Endress+Hauser Cerabar M PMC51 - PMP51: Process Connections with Flush-Mounted Process Isolating Diaphragm

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 69
PMP51: process connections
with flush-mounted process
isolating diaphragm
EN/DIN flanges, connection dimensions as per EN 1092-1/DIN 2527
D
k
b
g
60
2
d =
M
ø28
41
g
2
m
A0022643
D Diameter of flange
b Thickness
g Raised face
m Width of raised face
k Hole circle
g
2
Diameter of hole
d
M
Max. diameter of the process isolating diaphragm
Engineering unit mm
Flange
1)
Boltholes Weight
Flange
Option
2)
Nominal diameter Nominal pressure Shape
3)
D b g m Quantity g
2
k
[mm] [mm] [mm] [mm] [mm] [mm] [kg (lb)]
DN 25 PN 10-40 B1 (D) 115 18 68
4)
4 4 14 85 1.2 (2.65) CNJ
DN 32 PN 10-40 B1 (D) 140 18 78
4)
9 4 18 100 1.9 (4.19) CPJ
DN 40 PN 10-40 B1 (D) 150 18 88
4)
14 4 18 110 2.2 (4.85) CQJ
DN 50 PN 10-40 B1 (D) 165 20 102 - 4 18 125 3.0 (6.62) CXJ
DN 80 PN 10-40 B1 (D) 200 24 138 - 8 18 160 5.3 (11.69) CZJ
1) Material: AISI 316L
2) Product Configurator, "Process connection" section
3) Description as per DIN 2527 provided in brackets
4) With these process connections the raised face is smaller than described in the standard. Due to the smaller raised face, a special seal must be
used.