Endress+Hauser Cerabar M PMC51 - Page 91

Cerabar M PMC51, PMP51, PMP55
Endress+Hauser 91
EN/DIN flanges with barrel (extended diaphragm seal), connection dimensions as per EN
1092- 1/DIN 2527 and DIN 2501-1
g
2
d
M
d
3
k
D
g
b
L
3
A0023914
D Diameter of flange
b Thickness
g Raised face
k Hole circle
g
2
Diameter of hole
d
M
Max. diameter of the process isolating diaphragm
d
3
Barrel (extended diaphragm seal) diameter
L Barrel (extended diaphragm seal) length
Engineering unit mm
Flange
1) 2)
Boltholes Diaphragm seal Option
3)
Nominal diameter Nominal pressure Shape
4)
D b g Quantity g
2
k d
M
Weight
[mm] [mm] [mm] [mm] [mm] d
M
[kg (lb)]
DN 50 PN 10-40 B1 (D) 165 20 102 4 18 125 47
5)
FDJ
5)
DN 80 PN 10-40 B1 (D) 200 24 138 8 18 160 72
5)
FEJ
5)
1) Material: AISI 316L
2) In the case of process isolating diaphragms made of Alloy C276, Monel or tantalum, the raised face of the flange and the barrel pipe are made of
316L
3) Product Configurator, "Process connection" section
4) Description as per DIN 2527 provided in brackets
5) Available with 50 mm (1.97 in), 100 mm (3.94 in) and 200 mm (7.87 in)barrel, (extended diaphragm seal), for barrel (extended diaphragm
seal) diameter and weight see the following table
Option
1)
Nominal diameter Nominal pressure (L) d
3
Weight
[mm] [mm] [kg (lb)]
FDJ DN 50 PN 10-40 50 / 100 / 200 48.3 3.2 (7.1)/ 3.8 (8.4)/ 4.4 (9.7)
FEJ DN 80 PN 10-40 50 /100 / 200 76 6.2 (13.7)/ 6.7 (14.8)/ 7.8 (17.2)
1) Product Configurator, order code for "Process connection"