Endress+Hauser Proline Promag W 400 - Page 121

Proline Promag W 400 EtherNet/IP Diagnostics and troubleshooting
Endress+Hauser 121
Parameter overview with brief description
Parameter Description User interface / User entry Factory setting
Device tag Enter the name for the measuring point. Max. 32 characters, such as
letters, numbers or special
characters (e.g. @, %, /)
Promag 400
Serial number Displays the serial number of the measuring
device.
Max. 11-digit character string
comprising letters and
numbers.
79AFFF16000
Firmware version Displays the device firmware version
installed.
Character string with the
following format:
xx.yy.zz
01.01
Device name Displays the name of the transmitter. Character string composed of
letters, numbers and certain
punctuation marks.
Promag 400
Order code Displays the device order code. Character string composed of
letters, numbers and certain
punctuation marks
–
Extended order code 1 Displays the 1st part of the extended order
code.
Character string –
Extended order code 2 Displays the 2nd part of the extended order
code.
Character string -
Extended order code 3 Displays the 3rd part of the extended order
code.
Character string -
ENP version Displays the version of the electronic
nameplate.
Character string in the format
xx.yy.zz
2.02.00
IP address Displays the IP address of the Web server of
the measuring device.
4 octet: 0 to 255 (in the
particular octet)
192.168.1.212
Subnet mask Displays the subnet mask. 4 octet: 0 to 255 (in the
particular octet)
255.255.255.0
Default gateway Displays the default gateway. 4 octet: 0 to 255 (in the
particular octet)
0.0.0.0