Endress+Hauser Proline Promag W 400 - Page 155

Proline Promag W 400 EtherNet/IP Technical data
Endress+Hauser 155
ASME B16.5
• DN 25 to 1200 (1 to 48"):
Stainless steel, F316L similar to 1.4404
• DN 25 to 300 (1 to 12")
2)
:
Carbon steel, A105 similar to 1.0432
• DN 350 to 1200 (14 to 48")
2)
:
Carbon steel, A105/A515 Grade 70
AWWA C207
• DN 48":
Carbon steel, A105/A181/P265GH/S275JR
• DN 54 to 72":
Carbon steel, P265GH similar to 1.0425
• DN 48 to 78"
2)
:
Carbon steel, A105/A181/P265GH/S275JR
AS 2129
• DN 50 to 1200:
Carbon steel, A105/S235JRG2
• DN 350 to 1200
2)
:
Carbon steel, A105/FE410WB/P235GH/P265GH/S235JRG2
AS 4087
• DN 50 to 1200:
Carbon steel, A105/S275JR
• DN 350 to 1200
2)
:
Carbon steel, A105/P265GH/S275JR
JIS B2220
• Stainless steel, F316L similar to 1.4404
• Carbon steel, A105/A350LF2
1)
Seals
In accordance with DIN EN 1514-1
Accessories
Display protection
Stainless steel, 1.4301 (304L)
Ground disks
• Stainless steel, 1.4435 (316L)
• Alloy C22, 2.4602 (UNS N06022)
• Tantalum
Fitted electrodes Measurement, reference and empty pipe detection electrodes available as standard with:
• 1.4435 (316L)
• Alloy C22, 2.4602 (UNS N06022)
• Tantalum
Optionally available with DN 350 to 2000 (14 to 78"):
Exchangeable measuring electrodes made from 1.4435 (316L)