Endress+Hauser Proline Promag W 400 - Page 154

Technical data Proline Promag W 400 EtherNet/IP
154 Endress+Hauser
Sensor housing
• DN 25 to 300 (1 to 12"):
– Aluminum, AlSi10Mg, coated
– Carbon steel with Al/Zn protective coating
• DN 50 to 300 (2 to 12"):
Carbon steel with protective varnish (IP68)
• DN 350 to 2000 (14 to 78"):
Carbon steel with protective varnish
Sensor connection housing
• Standard: aluminum, AlSi10Mg, coated (IP66/67)
• Option:
– Polycarbonate for IP68 with DN 50 to 300 (2 to 12")
– Polycarbonate for order code "Sensor option", option CA…CE "Corrosion protection" with
DN 350 to 2000 (14 to 78")
Measuring tubes
• DN 25 to 300 (1 to 12")
1)
: stainless steel, 1.4301/1.4306/304/304L
• DN 350 to 1200 (14 to 48")
1)
: stainless steel, 1.4301/304
• DN 1350 to 2000 (54 to 78")
1)
: stainless steel, 1.4301 similar to 304
Liner
• DN 25 to 1200 (1 to 48"): polyurethane
• DN 50 to 2000 (2 to 78"): hard rubber
Electrodes
• Stainless steel, 1.4435 (316L)
• Alloy C22, 2.4602 (UNS N06022)
• Tantalum
Process connections
EN 1092-1 (DIN 2501)
• DN 25 to 1200
1)
:
– Stainless steel, 1.4404/1.4571/F316L
– Carbon steel, A105/FE410WB/P250GH/S235JRG2/S235JR+N
• DN 1350 to 2000
1)
:
– Stainless steel ,1.4404/1.4571
– Carbon steel, P250GH/S235JRG2
• DN 450 to 2000
2)
:
Carbon steel, A105/S235JRG2
EN 1092-1 (DIN 2501), PN6:
DN 350 to 1000
1)
:
Carbon steel, A105/FE410WB/S235JRG2
1) For carbon steel flange material with Al/Zn protective coating (DN 25 to 300 (1 to 12")), protective varnish (IP68) (DN 50 to 300 (2 to 12")) or
protective varnish ≥ DN 350 (14")
2) Order Code for "Design", Option A "Insertion length short"