ENSONIQ DP/4 Musician's Manual

Section 3 - Config Parameters
nr
U:t
I>"':":'::'>:}'U:>:>~:U~::i~i . i~:ir r "" · ' === ==========~
Feedback D to C
I=IMount =00
05 - (Config Dependent)
This parameter, identical to parameter 04, is dependent on how Units C and D are routed
together (determined by parameter 03).
nr
,UO
06 - AB Input Select
1=18 Input Select=
(12) Stereo
Range: (12) Stereo or (1) Mono
This parameter selects either a mono (Input 1) or stereo (Inputs 1 and 2) signal.
ni
UI
(b)ypass (k)ill
i=I=b B=b C=b D=b
07 - Bypass Kill (Unit) A
08 - Bypass Kill (Unit) B
09 - Bypass Kill (Unit) C
10 - Bypass Kill (Unit) D
These parameters determine what happens when you bypass a unit (the red LED is lit). When set
to
bypass (b), only the dry signal passes through the unit. When set to kill (k), no signal passes
through the unit.
When the units are set to bypass (b), it's like setting the Mix to 00 . When the units are set to kill
(k), it's like setting the Volume to 00.
ENSONIQ DP/4 Musician's Manual 49

ENSONIQ DP/4 Specifications

General

Brand	ENSONIQ
Model	DP/4
Category	Recording Equipment
Language	English