Enterasys K6 User Manual

Using the OFFLINE/RESET Button
Enterasys K-Series K6 Chassis Hardware Installation Guide 4-7
Using the OFFLINE/RESET Button
YoucanshutdownK6chassisusingtheOFFLINE/RESETbutton,showninFigure 4‐5,whichis
ontheK‐Seriesfabriccard.TherearetwoprocedurestoshutdownanK6chassis:
• RecommendedShutdownProcedureUsingOFFLINE/RESETButton
• LastResortShutdownProcedureUsingOFFLINE/RESETButton(Thisprocedureisnot
recommended)

Figure 4-5 Fabric Card OFFLINE/RESET Button
Recommended Shutdown Procedure Using OFFLINE/RESET Button
BeforeshuttingoffpowertoaK6chassis,pressortaponitsOFFLINE/RESETbuttonforlessthan
onesecond.
ThefabriccardCPULEDchangesfromsolidgreentoblinkingbetweengreenandamber,
indicatingthattheK6chassisisshuttingdown.Attheendoftheshutdownroutine,the
CPULED
changestoa67%/33% sequenceofamber/off,respectively,indicatingthesystemisinahaltstate.
AtthistimeitissafetorestarttheK6chassis.
WhenyouinitiateacontrolledshutdownwiththeOFFLINE/RESETbutton,youhave60seconds
fromthetimetheCPULEDstartsflashing
amber/offuntilthedeviceautomatica llyrestarts.
Last Resort Shutdown Procedure Using OFFLINE/RESET Button
ToresetaK6chassiswithoutitperforminganorderlyshutdownroutine,pressandholdthe
OFFLINE/RESETbuttonforapproximately6seconds.
1 OFFLINE/RESET button
Caution: This method of shutting down a K6 chassisis not recommended except as a last resort,
because all processes currently running on the K6 chassiswill be interrupted resulting in loss of
frames.
Precaución: No se recomienda utilizar este método para apagar un chasis K6. Recurra a él sólo
como último recurso, puesto que interrumpe todos los procesos del chasis K6 en funcionamiento,
lo que podría resultar pérdidas de frames.

Enterasys K6 Specifications

General

Brand	Enterasys
Model	K6
Category	Chassis
Language	English