Enterasys K6 User Manual

COM Port Pinout Assignments
Enterasys K-Series K6 Chassis Hardware Installation Guide A-3
COM Port Pinout Assignments
TheCOMportisanRJ45communicationsportforlocalaccesstolocalmanagement.Refertothe
Table A‐5fortheCOMportpinassignments.
Regulatory Compliance
Thisproductmeetsthesafety,electromagneticcompatibility(EMC),andenvironmental
requirementslistedinTable A‐6.
Table A-5 COM Port Pin Assignments
Pin Signal Name Input/Output
1 Transmit Data (XMT) Output
2 Data Carrier Detect (DCD) Output
3 Data Set Ready (DSR) Input
4 Receive Data (RCV) Input
5 Signal Ground (GND) NA
6 Data Terminal Ready (DTR) Output
7 Request to Send (RTS) Input
8 Clear to Send (CTS) NA
Table A-6 Compliance Standards
Regulatory Compliance Standard
Safety UL 60950-1, FDA 21 CFR 1040.10 and 1040.11, CAN/CSA C22.2
No. 60950-1, EN 60950-1, EN 60825-1, EN 60825-2,
IEC 60950-1, 2006/95/EC (Low Voltage Directive)
Electromagnetic Compatibility (EMC) FCC 47 CFR Part 15 (Class A), ICES-003 (Class A), EN 55022
(Class A), EN 55024, EN 61000-3-2, EN 61000-3-3, AS/NZ
CISPR-22 (Class A). VCCI V-3. CNS 13438 (BSMI), 2004/108/EC
(EMC Directive)
Environmental 2002/95/EC (RoHS Directive), 2002/96/EC (WEEE Directive),
Ministry of Information Order #39 (China RoHS)

Enterasys K6 Specifications

General

Brand	Enterasys
Model	K6
Category	Chassis
Language	English