Enterasys K6 - Appendix A: Specifications and Regulatory Compliance; K6 Chassis Specifications

Enterasys K-Series K6 Chassis Hardware Installation Guide A-1
A
Specifications and Regulatory Compliance
Thisappendixprovidesoperatingspecificat ions fortheK6chassis.EnterasysNetworksreserves
therighttochangethespecificationsatanytimewithoutnotice.
ForMTBFinforma tion,refertothefollowingEnterasysNetworkssupportWebsite:
http://secure.enterasys.com/support/mtbf/
K6 Chassis Specifications
K-AC-PS-1400W Power Supply Specifications
Table A-1 K6 Chassis Specifications
Item Specification
Dimensions 48.13 cm W x 36.12 cm D x 22.15 cm H (5U)
(18.95" W x 14.219" D x 8.719" H)
Weight 13.46 kg (29.65 lb)
Environmental Requirements
Operating Temperature 5°C to 45°C (41°F to 113°F)
Storage Temperature -30°C to 73°C (-22°F to 164°F)
Operating Relative Humidity 5% to 90% (non-condensing)
Table A-2 K-AC-PS-1400W Power Supply Specifications
Item Specification
Electrical
Input Frequency 50 to 60 Hz
Input 100 to 120Vac 12A @ 12Vdc 50A/54Vdc14.8A
200 to 240Vac 10A @ 12Vdc 50A/54Vdc14.8A
Physical
Weight 1.66 kg (3.65 lb)