Epson SC-F2000 - Page 101

SC-F2000 Revision C
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 101
Confidential
15. Remove the four screws, and remove the Cover.
E) Silver M3x6 S-tite screw: 4 pcs
Figure 3-47. Removing the Cover
16. Remove the six screws that secure the POWER SUPPLY BOARD.
F) Silver M3x6 S-tite screw: 6 pcs
17. Disconnect the cable from the connector (CN1) of the POWER SUPPLY
BOARD.
Figure 3-48. Removing the POWER SUPPLY BOARD
D
Cover
D
D
D
POWER SUPPLY BOARD
E
E
E
E
E
E
Connector
(CN1)
Cable