SC-F2000 Revision C
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 182
Confidential
3.4.6.10 REAR TF SENSOR
1. Remove the REAR COVER SUB ASSY. (p77)
2. Disengage the four hooks, and remove the REAR TF SENSOR.
3. Disconnect the cable from the connector.
Figure 3-147. Removing the REAR TF SENSOR
A D J U S T M E N T
R E Q U I R E D
When replacing/removing this part, refer to “4.1.2 Adjustment
Items and the Order by Repaired Part” (p194) and make sure to
perform the specified operations including required adjustment.
REAR TF SENSOR
Connector
Cable
To Next Page
Loading...
