Epson SC-F2000 - Page 181

SC-F2000 Revision C
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 181
Confidential
3.4.6.9 FRONT TF SENSOR
1. Remove the FRONT SUB COVER. (p80)
2. Remove the PLATEN. (p71)
3. Remove the BELLOWS ASSY. (p173)
4. Remove the RIGHT FRONT COVER. (p81)
5. Disengage the four hooks, and remove the FRONT TF SENSOR.
6. Disconnect the cable from the connector.
Figure 3-146. Removing the FRONT TF SENSOR
Hooks
FRONT TF SENSOR
Connector
Cable