Epson Stylus Photo R2000 Series - Page 190

Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series Revision I
Stylus Photo R2000/R2000s Disassembly 190
 Upper Housing / Printer Cover
1. Remove the screws (C.B.P 3x10) (x6) that secure the Upper Housing, and
lift the Upper Housing/Printer Cover.
Figure 8-11. Remove the Upper Housing / Printer Cover
 Wireless LAN Board Assy
1. Remove the screw (C.B.P 3x8) (x1) that secure the earth cable, and remove
the screw (C.B.P 3x8) (x1) that secure the Wireless LAN Board Assy.
Figure 8-12. Remove the Wireless LAN Board Assy (1)
2. Disengage the hook (x1).
Figure 8-13. Remove the Wireless LAN Board Assy (2)
Tighten the screws in the order show in Figure 8-11 .
C.B.P 3x10
(6±1kgf.cm)
C.B.P 3x10
(6±1kgf.cm)
①
②
④
③
⑤
⑥
High Voltage
Module Cable
Wireless LAN
Board Cable
C.B.P 3x8
(6±1kgf.cm)
Wireless LAN
Board Earth Cable
PictBridge Holder
Earth Cable
Hook
Hook Hole