Epson TM-P20II

42
"Set using Automatic
Private IP Addressing"
"Enable" / "Disable"
If "Obtain IP Address" is "Manual", this
item is not shown.
"IP Address"
"xxx.xxx.xxx.xxx"
xxx: 0 - 255 in decimal
Not shown when Connection Status
is disabled.
"Subnet Mask"
"xxx.xxx.xxx.xxx"
xxx: 0 - 255 in decimal
Not shown when Connection Status
is disable.
"Default Gateway"
"xxx.xxx.xxx.xxx"
xxx: 0 - 255 in decimal
Not shown when Connection Status
is disable.
"DNS Server Setting"
"Auto" / "Manual"
Not shown when Connection Status
is disable.
"Primary DNS Server"
"xxx.xxx.xxx.xxx"
xxx: 0 - 255 in decimals
Not shown when Connection Status
is disable.
"Secondary DNS Server"
"xxx.xxx.xxx.xxx"
xxx: 0 - 255 in decimal
Not shown when Connection Status
is disable.
"DNS Host Name Setting"
"Auto" / "Manual"
Not shown when Connection Status
is disable.
" DNS Host Name Status"
"Unknown"/ "Successful" / "Failed"
Shown if the way of obtaining a DNS
host name is auto.
Not shown when Connection Status
is disable
.
"DNS Host Name"
Shows the DNS host name currently used.
Not shown when Connection Status
is disable.
"DNS Domain Name
Setting"
"Auto" / "Manual"
Not shown when Connection Status
is disable.
"DNS Domain Name Status"
"Unknown"/ "Successful" / "Failed"
Shown if the way of obtaining a DNS
host name is auto.
Not shown when Connection Status
is disable.
"DNS Domain Name"
Shows the DNS domain name currently used.
Not shown when Connection Status
is disable.
"Register the network
interface address to DNS"
"Enable" / "Disable"
Not shown when Connection Status
is disable.
"Proxy Server Setting"
"Do Not Use" / "Use"
Not shown when Connection Status
is disable.
"Proxy Server"
Shows the proxy server address in the IP address or
FQDN format.
- IP address format
"xxx.xxx.xxx.xxx"
xxx: 0 - 255 in decimal
- FQDN format
ASCII (alphanumeric, dot, hyphen), 1-255 characters
Shown when the value for "Proxy
Server Setting" is "Use".
Not shown when Connection Status
is disable.
"Proxy Server Port Number"
Range of 0 - 65535 in decimals.
Shown when value of "Proxy Server
Setting" is "Use".
Not shown when Connection Status
is disable.
"Proxy Server User Name"
0 - 255 byte characters (range of 0x20 - 0x7E in ASCII
codes)
Shown when value of "Proxy Server
Setting" is "Use".
Not shown when Connection Status
is disable.
"Proxy Server Password"
"Not Set" / "**********"
Shown when value of "Proxy Server
Setting" is "Use".
Not shown when Connection Status
is disable.
"IPv6 Setting"
"Enable" / "Disable"
Not shown when Connection Status
is disable.
"IPv6 Privacy Extension"
"Enable" / "Disable"
Shown if IPv6 is enabled.
Not shown when Connection Status
is disable.