Epson TM-P20II

43

"IPv6 DHCP Server Setting"
"Do Not Use" / "Use"
Shown if IPv6 is enabled.
Not shown when Connection Status
is disable.
"IPv6 Address"
Shows an IPv6 address default gateway.
Shown if IPv6 is enabled.
Not shown when Connection Status
is disable.
"IPv6 Address Default
Gateway"
Shows a valid IPv6 link-local address.
Shown if IPv6 is enabled.
Not shown when Connection Status
is disable.
"IPv6 Link-Local Address"
Shows a valid stateful IPv6 address.
Shown if IPv6 is enabled.
Not shown when Connection Status
is disable.
"IPv6 Stateful Address "
Shows a valid stateless IPv6 address.
Shown if IPv6 is enabled.
Not shown when Connection Status
is disable.
"IPv6 Stateless Address 1"
Shows a valid stateless IPv6 address.
Shown if IPv6 is enabled.
Not shown when Connection Status
is disable.
"IPv6 Stateless Address 2"
Shows a valid stateless IPv6 address.
Shown if IPv6 is enabled.
Not shown when Connection Status
is disable.
"IPv6 Stateless Address 3"
Shows an IPv6 address.
Shown if IPv6 is enabled.
Not shown when Connection Status
is disable.
"IPv6 Primary DNS Server"
Shows an IPv6 address.
Shown if IPv6 is enabled.
Not shown when Connection Status
is disable.
"IPv6 Secondary DNS
Server"
Shows an IPv6 address default gateway.
Shown if IPv6 is enabled.
Not shown when Connection Status
is disable.
"Wi-Fi Setup"
"AOSS" / "WPS" / "Manual" / "Wi-Fi Auto Connect" /
"Epson iPrint"
Shown if wireless LAN is used.
Not shown when Connection Status
is disable.
"Wi-Fi Mode"
"IEEE802.11b" / "IEEE802.11g" / "IEEE802.11b/g" /
"IEEE802.11b/g/n"/ "IEEE802.11a/n/ac"
Shown if the wireless LAN is used.
Not shown when Connection Status
is disable.
"SSID"
1 – 32 characters
Alphanumeric and sign characters
Shown if the wireless LAN is used.
Not shown when Connection Status
is disable.
"Channel"
- Not equipped with Wi-Fi chip
Range of "1" - "13"
- Equipped with Wi-Fi chip
2.4GHz
Range of "1" - "13"
5GHz
"36"/"40"/"44"/"48"/"52"/"56"/"60"/"64"/"100"/"104"/"10
8"/"112"/"116"/"120"/"124"/"128"/"132"/"136"/"140"/"14
9"/"153"/"157"/"161"/"165"
Shown if the wireless LAN is used.
Not shown when Connection Status
is disable.
"Security Level"
"None" / "WEP-64bit(40bit)" / "WEP-128bit(104bit)" /
"WPA-PSK(TKIP)" / "WPA2-PSK(AES)" /
"WPA2/WPA3-Enterprise" / "WPA3-SAE(AES)"
Shown if the wireless LAN is used.
Not shown when Connection Status
is disable.
"Password"
"Not Set" / "**********"
Shown if wireless LAN is used and
Security Level is not
WPA2/WPA3-Enterprise.
Not shown when Connection Status
is disable.
"MAC Address"
"XX:XX:XX:XX:XX:XX"
X: 0 - F in hexadecimal
Not shown when Connection Status
is disable.