Epson TM-P20II Reference Guide

52
(APIPA)"
"Enable" / "Disable"
grayed-out.
This item is not displayed on
CIJ.
"IP Address"
A text box is provided.
Format: "xxx.xxx.xxx.xxx"
"xxx”: "0"~"255" in decimals.
The following addresses can not be set.
"0.0.0.0"~"0.255.255.255.255"
Loopback address("127.0.0.0"~"127.255.255.255")
Class D address("224.0.0.0"~"239.255.255.255")
Class E address("240.0.0.0"~"255.255.255.255")
Directed broadcast address("255.255.255.255")
- If "Obtain IP Address" is
"Auto", this item is grayed-out.
"Subnet Mask"
A text box is provided.
Format: "xxx.xxx.xxx.xxx"
"xxx": "0"~"255" in decimals.
The following addresses can not be set.
Discontinuous mask bit (Ex: "255.254.128.0")
0.0.0.0
255.255.255.254
255.255.255.255
- If "Obtain IP Address" is
"Auto", this item is grayed-out.
"Default Gateway"
A text box is provided.
Format: "xxx.xxx.xxx.xxx"
"xxx": "0"~"255" in decimals.
The following addresses can not be set.
"0.0.0.0" (The display is blank if this value is set.)
The following addresses can not be set.
"0.0.0.1"~"0.255.255.255.255"
Loopback address("127.0.0.0"~"127.255.255.255")
Class D address("224.0.0.0"~"239.255.255.255")
Class E address("240.0.0.0"~"255.255.255.255")
Directed broadcast address("255.255.255.255")
- If "Obtain IP Address" is
"Auto", this item is grayed-out.
"DNS Server Setting"
Two radio buttons are provided to choose one of the
following:
"Auto" / "Manual"
"Manual" is selected when "Obtain IP Address" is "Manual".
-
"Primary DNS Server"
A text box is provided.
Format: "xxx.xxx.xxx.xxx"
"xxx": "0"~"255" in decimals.
("0.0.0.0") is prohibited.
If "Primary DNS Server" is blank but a value has been
entered for "Secondary DNS Server", an error occurs.
You can leave this field blank.
- If "DNS Server Setting" is
"Auto", this item is grayed-out.
"Secondary DNS Server"
A text box is provided.
Format: "xxx.xxx.xxx.xxx"
"xxx": "0"~"255" in decimal.
("0.0.0.0") is prohibited.
You can enter the empty.
- If "DNS Server Setting" is
"Auto", this item is grayed-out.
"DNS Host Name Setting"
Two radio buttons are provided to choose one of the
following:
"Auto" / "Manual"
-
"DNS Host Name"
The Device Name is shown.
-
"DNS Domain Name
Setting"
Two radio buttons are provided to choose one of the
following:
"Auto" / "Manual"
-
"DNS Domain Name"
A text box is provided. The string must have 2 to 249
characters and contain
"A"~"Z", "a"~"z", "0"~"9" , and "-". (Spaces are not allowed.)
However, it is necessary to enter no more than 251
characters in total for both the host name and domain
name. If this number is exceeded, the configuration is not
applied. The leading character must be "A"~"Z" or "a"~"z".
("0"~"9" and "-" are not allowed.)
The final character must be "A"~"Z" , "a"~"z", or "0"~"9". ("-"
is not allowed.)
The number of characters on each label separated by a
period (".") must be 1 to 63.
- If "DNS Domain Name
Setting" is "Auto", this item is
grayed-out.
"Register the network
interface address to DNS"
Two radio buttons are provided to choose one of the
following:
"Enable" / "Disable"
-

Epson TM-P20II Specifications

General

Brand	Epson
Model	TM-P20II
Category	Printer
Language	English