Epson TM-P20II

85
10.4.4.2.2.1.3 Description Items
Table 10-73 Description Items
10.4.4.2.2.1.4 Button
The following table shows the buttons on the page.
Table 10-74 Button

"Password"
-Enter the passphrase for encryption to create a private key.
Usable string: ASCII code (0x20-0x7E)
Max of 48 characters.
- Enabled if certificate
with private key
(PKCS#12) selected
"CA Certificate 1"
-Enter the file of the certificate signed by CA issuing the server
certificate to import it into the printer. You can also use the
file button to select the file.
- Enabled if certificate
(PEM/DER) selected
"CA Certificate 2"
-Enter the file of the certificate signed by CA issuing the first
CA certificate to import it into the printer. It also is able to
select the file using file button.
- Enabled if certificate
(PEM/DER) selected
Items
Description
"Note: It is recommended to communicate via HTTPS for
importing a certificate."
Fixed Strings
“To use ePOS-Device, use a certificate with an RSA key
length.”
Fixed Strings
Items
Description
"OK"
Button at the bottom of the main frame to perform
importing.
After the "OK" button is pressed, Web Config performs the
following operations depending on conditions.
- If the entered value is invalid, Web Config displays a
pop-up window with an error message.
- If the entered value is NOT invalid and a CA-signed
Certificate was imported already, Web Config displays a
pop-up window with a warning message.
- If the entered value is NOT invalid and a CA-signed
Certificate was NOT imported already, Web Config displays
a Result page.
"Back"
- Button at the bottom of the main frame for going back to
the top page of the certificate settings.