88
10.4.4.2.4.1.3 Button
Table 10-78 Button
When the “Generate” button is pressed, Web Config displays a pop-up window with the following message if it recognizes an
error in the entered value.
Table 10-79 Error Pop-up Window
10.4.4.2.4.2 Result Page
After the OK button is pressed, Web Config shows the hourglass and then goes to the Result page.
(Refer to Deleting a CA-signed certificate.)
10.4.4.2.4.2.1 Result Page
Table 10-80 Setting Result
10.4.4.2.5 Download CSR(Certificate Signing Request)
This page is shown after ‘Download’ for importing in the CSR settings is pressed.
The default name of the downloaded file is in the form of “EXPORT_CSR_<Serial Number>_<Date and Time>”.
<Serial Number> is the Product’s Serial Number.
<Date and Time> is the Date and Time set for the product.
The method of downloading the CSR varies by Web browser.
- Button for generating CSR at the bottom of the main frame
-Button at the bottom of the main frame for going back to the top
page of the certificate settings.
"Invalid value below. ¥n -%s¥n -%s¥n…"
Shows a warning when a value is entered incorrectly.
This message is shown when the settings are completed.
This message is shown if the settings fail.
To Next Page
Loading...
