93
10.4.5.1.1.1.2 Setting Items of Default Policy
The following figure shows the layout of this settings area.
Table 10-89 Setting Items
"Each policy is applied with
following priorities:"
"Group Policy 1 > Group
Policy 2 > ... > Group Policy
Description of the policy
Two radio buttons are provided to choose one of the
following:
Use the drop-down list to make a choice.
"Permit Access" / "Refuse Access" / "IPsec"
If "IPsec/IP Filtering" is "Enabled",
this item can be configured.
Use the radio buttons to choose "IKEv1" / "IKEv2".
If "IPsec/IP Filtering" is "Enabled"
and "Access Control" is "IPsec", this
item can be configured.
Use the drop-down list to make a choice.
"Pre-Shared Key" / "Certificate"
This item is displayed when "IKE
Version" is "IKEv1".
This item is enabled when
"IPsec/IP Filtering" is "Enabled"
and "Access Control" is "IPsec".
Usable string: ASCII code (0x20-0x7E)
Max of 127 characters.
This item is displayed when "IKE
Version" is "IKEv1".
This item is enabled when
"IPsec/IP Filtering" is "Enabled"
and "Access Control" is "IPsec".
Same as "Pre-Shared Key".
This item is displayed when "IKE
Version" is "IKEv2".
Use the drop-down list to make a choice.
"Pre-Shared Key" / "Certificate"
This item is displayed when "IKE
Version" is "IKEv2".
This item is enabled when
"IPsec/IP Filtering" is "Enabled"
and "Access Control" is "IPsec".
Use the drop-down list to make a choice.
"Distinguished Name" / "IP Address" / "FQDN" / "Email
Address" / "Key ID"
This item is displayed when "IKE
Version" is "IKEv2".
This item is enabled when
"IPsec/IP Filtering" is "Enabled",
"Access Control" is "IPsec", and
"Authentication Method" for
"Local" is "Pre-Shared Key".