Epson TM-P20II Reference Guide

96
10.4.5.1.1.1.3 Button
Table 10-90 Button
If Web Config recognizes an error in the entered value after the Next button is pressed, the following error pop-up is shown.
Table 10-91 Error Pop-up

"AH"
Title strings. "Authentication" is contained.
-
"Authentication"
Use the drop-down list to choose from the following..
Support algorithms refer to the Network Functional
Specifications.
"SHA-1" / "SHA-256" / "SHA-384" / "SHA-512" / "MD5" /
"Any"
This item is enabled when
"IPsec/IP Filtering" is "Enable",
"Access Control" is "IPsec" and
"Security Protocol" is "AH".
Items
Description
"Next"
If pressed, Web Config goes to the Confirm IPsec Settings
page.
Items
Description
"Invalid value below."
This message is shown when the value entered in the
text box is invalid. The item names of the corrected
values are shown under the message in the left cell. If
there are two or more items whose values were
corrected, those items are listed line by line.
<The case of products with printing function >
"The combination of Local Address (Printer) and Remote
Address (Host) is incorrect."
<The case of sccaner>
"The combination of Local Address (Scanner) and Remote
Address (Host) is incorrect."
This message is displayed if the combination of the Local
Address (Printer/Scanner) and Remote Address (Host) is
incorrect. See the following table.
"Select 1 to 10 service names."
Displayed if there are 0 or 11 or more checks for "Service
Name".
"Pre-shared keys you entered do not match."
Displayed if the values you entered for the Pre-shared
keys do not match

Epson TM-P20II Specifications

General

Brand	Epson
Model	TM-P20II
Category	Printer
Language	English