Epson WF-C5790 - Page 496

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A
Disassembly/assembly Disassembly/Reassembly Procedures 496
Confidential
Optional Paper Cassette
1. Lift the printer, then remove the Optional Paper Cassette.
When attaching the Optional Paper Cassette, be sure to align the positioning pins (x2)
and the dowels so as to avoid damage to the Drawer Connector.
A4
Dowel
Optional Paper Cassette
Positioning pins
Drawer Connector
Dowel
Rear Cover (Back)
1. Remove the four screws (S4: ), then remove the Rear Cover (Back).
Attach the two dowels of the Rear Cover (Back) to the positioning holes on the
Housing Left and Housing Right.
A5
Rear Cover (Back)
No. Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C
Dowel and
positioning hole
Housing Right Housing Left
Dowel and
positioning hole