Epson WF-C5790 - Page 503

EPSON WF-C5790/WF-C5790a/WF-C5710/ET-8700/WF-C5210/WF-C5290/WF-C5290a Revision A
Disassembly/assembly Disassembly/Reassembly Procedures 503
Confidential
Relay Board Assy
6. Remove the four screws (S5: ), and remove the Relay Board from the Shield Plate.
No. Screw Type
S5
C.B.S-TITE-SCREW-3x6-F.ZN-3C
Shield Plate
Relay Board
Speaker Assy
1. Disconnect the cable from the connector (CN3) on the Main Board Assy.
2. Release the cable from seven slits on the Frame Base.
3. Remove the two screws (S4: ), then remove the Speaker Holder.
4. Remove the Speaker Assy.
A15
Speaker Assy
No. Screw Type
S4
C.B.P-TITE-SCREW-3x10-F.ZN-3C
Speaker Holder
CN3
Top
Main Board Assy
Cable
Slit