Ericsson 86010158 - ALC Controls and Connections

Ericsson | Antenna Line Congurator
10
4 Controls and Connections
① Touch-screen
② LED is lit: Data is transmitted to the AISG bus
③ LED for the DC charging:
• DC is lit in blue: ALC is in the standby mode
• DC is lit in yellow: ALC is turned on/off and the battery is charged
• DC is lit in green: the battery is fully charged
④ HF connection for the AISG bus
⑤ Connection for the AISG bus
⑥ Protective cap for the Wi-Fi antenna
⑦ On/off button
⑧ Mini-USB port to connect to a PC/to establish a network connection
⑨ USB port to use a USB stick:
• To update the ALC software, see section 8�6�2
• To update the software of the ALDs
• To export the data from the ALDs
⑩ DC charger connection
⑪ Protective clip
⑫ Cover for connections ⑧ ⑨ ⑩
⑬
Hook and loop fasteners to attach the display guard
Fig� 1: Structure of the ALC
If the ALC is not detected when its connected with the mini-USB to your Windows
(R)
PC, it is
necessary to install a Windows
(R)
driver, see section 6�4
Note