Ericsson | Antenna Line Congurator
25
8�4�3 Change the IP Address
8�4�4 Change the Password
① Tap the IP address value field
The numerical keyboard to enter numbers (②) is shown:
② Type the new IP address or enter it with the numerical
keyboard�
③ Tap Accept
④ At the end of all the changes done in the Numerical
Configuration submenu, tap Save to save the changes
(
⑦ in Fig� 20)�
① Tap the Password value field�
The alphanumerical keyboard to enter a new password
(
② in Fig� 22) is shown:
② Type the new password or enter it with the numerical
keyboard�
③ Tap to change the keyboard to caps lock, if required�
④ Tap to to change the keyboard to special characters, if
required�
⑤ Tap Accept (shown here as a tick)�
⑥ At the end of all the changes done in the Numerical
Configuration submenu, tap Save to save the changes
(
⑦ in Fig� 20)�
Fig� 21: Network configuration: Changing the IP address
Fig� 22: Network configuration: Changing the password