Ericsson 86010158 - Managing ALD Files

Ericsson | Antenna Line Congurator
31
8�6�4 Manage ALD Files
Tap the File Management ALD submenu (④ in Fig� 25)�
The following submenu opens: vTo open the list, delete
the existing entry:
To open the list, delete the existing entry:
① Selects the vendor from the list
② Selects the AISG protocol between AISG 2 and AISG 3
③ Selects the device type from the drop-down menu
• Between ALD Sensor (ASD), Geographic Location
Sensor (GLS), RET, TMA, FlexRET for the AISG 2
protocol�
• Between Single Primary ALD (SALD) and Multi-
primary ALD (MALD) for the AISG 3 protocol�
④ Selects the file type from the drop-down menu
between ALD Config Files, ALD FW Files and Vendor
Specific Files�
⑤ Goes to the selected file type to do more actions, see
section Import/Export/Delete ALD Files� Section:
8�6�4�1
Fig� 33: System configuration: Change the AISG Vendor
Fig� 32: System configuration: File management ALD
Before you import or export ALD files onto/from a USB stick, make sure to connect a USB stick
with the corresponding files to the ALC or use the PC with the browser�
Note