Ericsson 86010158 - Initial ALC Setup Process; First Start-Up Procedure

Ericsson | Antenna Line Congurator
11
5 Perform the Initial Setup
5�1 First Start-Up
When the ALC is switched on for the first time, this is
shown:
① and ② Adjust the Date and Time as required�
③ and ④ Enter Installer ID and Installation Company
(optional)�
⑤ Change the language�
⑥ Tap Save to confirm the settings� The settings are
saved and the ALC can be used immediately�
Fig�2: First Startup Screen