Ericsson | Antenna Line Congurator
15
Various devices can be connected with a Wi-Fi module to the ALC using Wi-Fi, for example a PC, laptop, tablet, phone,
and so on � Also, the ALC can be connected to a PC or laptop with a micro-USB cable�
The word PC is used throughout this document, but it can be any device that can be connected to the ALC�
he ALC user interface in the browser is almost the same to that on the ALC, for example a Save button in the browser
can contain more text, and so on �
The screenshots used in this manual are the screenshots from the ALC device and not the browser�
The ALC can be operated using both the ALC or through a browser�
If the connection to the ALC is lost, the following message
is shown:
1� Make sure that the Wi-Fi on the ALC is active�
2� Make sure that the PC is connected to the ALC Wi-Fi
hotspot�
Note
Note
Prerequisites
• The PC is on�
• The ALC is on and the Wi-Fi is activated, see section 8�4�1
1� Go to the Wi-Fi settings of the PC you want to connect
the ALC to�
2� If your PC is connected to a Wi-Fi, disconnect the PC
from the Wi-Fi�
3� Find the Wi-Fi alc�
4� Click connect� A window is shown where a password is
required�
5� Enter the default password ericssonalc�
6� Open a browser on your PC�
7� Enter 192�168�0�1 or alc.ericsson for Windows operating
systems� For other operating systems, enter only
192�168�0�1�
The ALC user interface is shown in the browser�
6�3 Connect a PC to the ALC
Fig� 7: Connection to the ALC is Interrupted
To Next Page
Loading...
