Ericsson 86010158 - Mechanical Level Adjustment; Measuring Mechanical Adjustment; Calibrating Mechanical Adjustment

Ericsson | Antenna Line Congurator
23
8�3 Mechanical Level
8�3�1 Calibrate the Mechanical Adjustment
① Shows the measured value of the mechanical
adjustment in degrees
② Calibrates the internal inclination sensor of the ALC
③ Closes the submenu and returns to the previous menu
In the Mechanical submenu you can measure the mechanical adjustment of an antenna�
Prerequisite:
• The ALC lies with its rear panel against an ALD, its level, vertical surface�
1� Tilt the ALC until the required adjustment is achieved�
2� Tap Save to calibrate the internal inclination sensor of the ALC�
Fig� 19: Mechanical Level