Ericsson | Antenna Line Congurator
32
8�6�4�1 Import/Export/Delete ALD Files
1� After all the selections in 8�6�4 are done, tap ⑤ in Fig�
34�
The following page is shown (on the example of the
AISG 2 protocol, RET antenna, and ALD Config Files):
To import/export new files, make sure that a USB stick is
inserted into the ALC or you use the PC with the Browser�
2� To select all files, set a tick at “Select All Files”
To select one or more files, tick the boxes next to the
corresponding files�
The file/files is/are selected and the buttons Import,
Export, and Delete are active:
Fig� 34: System configuration: File
Management ALD, ALD Config Files
Fig� 35: System configuration: File
Management ALD, ALD Config Files
To Next Page
Loading...
