Ericsson 86010158 - Importing ALD Files; Deleting ALD Files

Ericsson | Antenna Line Congurator
33
8�6�4�2 Import an ALD File
2� Select a folder in which an ALD file is stored�
3� Select an ALD file/files in a folder�
4� Tap Import�
The selected file is imported onto the ALC from the USB
stick�
1� Tap Import (
① in Fig� 35) to import an ALD Config File
from the USB stick onto the ALC�
If no USB stick is connected, the following warning
message or if a USB stick is connected, the folders on the
connected USB stick are shown:
Prerequisite:
• ALD files are selected on the ALC, see section Import/Export/Deleting ALD Files��
Fig� 36: No USB connected message Fig� 37: Import an ALD file: Folders
8�6�4�3 Delete an ALD File
Prerequisite:
• ALD files are selected on the ALC, see section Importing/Exporting/Deleting ALD Files
1� Tap Delete to delete the selected file from the ALC�
The selected file is deleted from the ALC�