Ericsson 86010158 - Adding FlexRET Subunit Details

Ericsson | Antenna Line Congurator
48
9�4�2�1 Add the Subunit Properties
1� Tap ① in the previous figure to open the list with the
individual subunits�
The following page is shown:
① Enters the sector ID
② Enters the base station ID
③ Enters the installer ID
④ Enters the installation date
⑤ Enters the value for the mechanical tilt
⑥ Enters the value for the mechanical bearing
⑦ Saves the changes
Fig� 62: Devices: Adding subunit properties