Ericsson 86010158 - Resetting to Factory Settings

Ericsson | Antenna Line Congurator
30
8�6�3 Reset the ALC to Factory Settings
1� Tap the Factory Reset submenu (③ in Fig� 25)�
The following submenu opens
2� Tap Save to reset the ALC to the factory settings�
The ALC turns off�
The connection to the ALC is terminated�
The ALC restarts automatically when it is reset to
factory settings�
Fig� 31: System configuration: Factory reset
It is necessary to reset the ALC to factory settings if:
• You forgot Wi-Fi settings, for example password�
• The ALC must be reset to factory settings�
Before you set the ALC to the factory settings, be aware that the following settings will be reset
to the factory default settings:
• Network settings
• User settings
• ALD configuration file (XCD)
Be aware that the following files will be deleted:
• ALD Config/FW/Info/Log Files
• ALD/Site sharing report files
• AISG Bus logging files
Note