Ericsson 86010158 - Antenna Line Device (ALD) Setup; Introduction to ALD Setup

Ericsson | Antenna Line Congurator
21
8 ALD Setup
8�1 Introduction
① Shows the voltage, current, and power of the feeder cable
and the AISG bus, see section 8�2
② Measures the mechanical adjustment of an antenna, see
section 8�3
③ Changes the network configuration, see section 8�4
④ Shows system information, see section 8�5
⑤ Changes system configuration, see section 8�6
⑥ Changes user configuration, see section 8�7
⑦ Performs service, see section 8�8
⑧ Exports the manual on a USB stick / Or opens the manual
on the ALC� See section 8�9
opens the manual as a PDF file in a browser if opened on the
PC
⑨ Exports the license on a USB stick / Or opens the license
on the ALC� See section 8�9 opens the license as a PDF file in
a browser if opened on the PC
⑩ Closes the submenu and returns to the previous menu
Fig� 17: Setup