Ericsson | Antenna Line Congurator
17
12� Select Network adapters, as the RNDIS emulator a
network connection:
13� Click Next� The following window is shown:
14� Select Microsoft Corporation from the Manufacturer list�
15� Select Remote NDIS Compatible Device below Network
Adapter�
16� Click Next�
A warning message is shown�
17� Click Yes�
The following window is shown:
The RNDIS Kitl device is now installed and is ready to be
used�
18� Click Close to complete the installation�
Fig� 10: Update Driver Select Network Adapter Fig� 11: Update Driver Select Microsoft RNDIS
Fig� 12: Successful installation
To Next Page
Loading...
