Ericsson | Antenna Line Congurator
40
If no ALD is found when scanning the AISG bus, ① fig 48 is
not available�
Note
Fig� 48: Devices: ALD found Fig� 49: Devices: Warning message
“Scan could not be started“
If one or more ALDs are found in the scanning process,
the page is shown as follows:
If the connection is not possible, the following warning
message is shown:
① Selects or deselects an ALD
② Selects the AISG protocol scanning options, see
section 9�1�1
③ Connects to the selected ALD
To Next Page
Loading...
