Extreme Networks EPICenter Guide

Configuring RADIUS for EPICenter Authentication
EPICenter Concepts and Solutions Guide
224
To create a Remote Access Policy:
1 Under the Internet Authentication Service, right click the Remote Access Policies folder, select New
and then Remote Access Policy.
The New Remote Access Policy Wizard will start. Click New to continue.
2 Type type a name for the Policy Name (see Figure 104, where EPICenter is used as an example),
then click Next.
If you need to create multiple policies, each must have a unique name, such as EPICenter-Admin and
EPICenter-Monitor.
Figure 104: Configuring a Remote Access Policy using the wizard
3 To configure the Access Method (Figure 105), click the Ethernet radio button, then click Next to
continue.