Extreme Networks EPICenter Guide User Manual

Managing your Network Assets
EPICenter Concepts and Solutions Guide
76
Figure 33: Utilization statistics for ports based on a port group
Using this same port group as the scope, you could define an RMON threshold rule for link utilization
(for MIB variable
extremeRtStatsUtilization) that would generate a trap when utilization exceeded
some percentage you define on any of the ports in the port group. Figure 34 shows an example of how
such a rule might be defined. You would then use this threshold rule to define an alarm, also scoped to
the same port group

Extreme Networks EPICenter Guide Specifications

General

Brand	Extreme Networks
Model	EPICenter Guide
Category	Software
Language	English