Extron electronics DMP 128 Plus - Page 144

DMP 128 Plus • Remote Control and Configuration 136
Command ASCII command
(host to device)
Response
(device to host)
Additional description
Reboot Commands
Reboot system
E1BOOT} Boot1]
Reboot network
E2BOOT} Boot2]
Serial Host Control Port Mode
Standard host control
(SIS)
EX!*1HSTM} HstmX!*1]
Device control (no SIS)
EX!*2HSTM} HstmX!*2]
Disable port
EX!*0HSTM} HstmX!*0]
Query port mode
EX!HSTM} X8%]
Ping
Execute test
E{address/name}
PING}
{address}*{bytes}*
{ttl}*{time}]
Example:
E192.168.254.254
PING}
192.168.254.254*64*
64*3.469
If ping fails to get reply
from address
{address}*0*0*0]
Timezone and Daylight Settings
Set time zone
E{zone name}*
TZON}
Tzon•{zone name,
description}]
View current time zone
ETZON}
{zone name,
description}]
List all time zones
E*TZON}
{zone name,
description}]
...]
...]]
NOTES:
X!
= Port Number 01 (always 01 for DMP 128 Plus)
X8%
= Port Mode 0 = disabled, 1 = standard, 2 = device