DMP 128 Plus • DSP Configurator Software 26
Input Filter Block
Double-click the Filter block to open the filter drop-down menu. Select one of the eleven
available filters to insert into the block.
Figure 46. Filter Block and Drop-Down Menu
Alternatively, right-click the Filter block and select Insert, then select a filter to insert it
into the block.
Figure 47. Insert Filter Drop-Down Menu
Once an initial filter is selected, the Filter block changes to display the type of filter
applied. For example, if High Pass Filter is selected, the Filter block would display
HIGH PASS instead of FILT. If multiple filters are applied, the Filter block displays FILT
over a dark green field.
Figure 48. Filter Block Icons
figure 46. Filter Block and Drop Down Menu
figure 47. Filters > Insert Drop Down Menu
figure 48. Filter Block Icons
To Next Page
Loading...
