Extron electronics DMP 128 Plus - Accessing the DSP Configurator Help File; DSP Configurator Main Workspace

DMP 128 Plus • DSP Configurator Software 12
7. From the DSP Configurator splash screen drop-down menu (see figure 14,
6
below),
select the model of DMP 128 Plus being connected to the host PC and click OK(
7
).
Figure 14. DSP Configurator Splash Screen
Accessing the DSP Configurator Help File
DSP Configurator comes loaded with a context-sensitive help file that can be accessed by
clicking the help icon ( ) in the top right corner of any dialog box in DSP Configurator.
Alternatively, click Help > Contents in the menu bar at the top of the main workspace,
or press <F1> on your keyboard. This help file contains detailed procedures and further
instruction on all DSP Configurator features.
DSP Configurator Main Workspace
The DSP Configurator main workspace can be divided up into four main sections (see
figure 15). Each section contains various functions to configure the DMP 128 Plus. Due to
the large number of inputs and outputs available on the DMP128Plus, not all channels can
be viewed at the same time in a single window. Use the expand and collapse buttons ( )
next to the input and output group names to show or hide input and output groups and their
corresponding mix matrices. If necessary, scroll through the window by using the mouse
wheel or the scroll bar at the right side of the DSP Configurator main workspace.
1
Menu Bar on page13
3
Mix-Points on page54
2
Mic/Line Inputs on page21
4
Outputs on page58
Figure 15. DSP Configurator Main Workspace
figure 14. DSP Configurator Splash Screen
figure 15. DSP Configurator Main Workspace