Extron electronics DMP 128 Plus - Output Building Blocks

DMP 128 Plus • DSP Configurator Software 59
Output Building Blocks
Extron building blocks are a quick configuration tool that can significantly reduce
configuration time. A building block is a collection of processor and gain settings for an
input or output processing chain. These building blocks have been built by Extron based on
extensive use and testing with each intended application or specific device.
Figure 99. Accessing Building Blocks on an Output
Click the output number to open the Building Blocks dialog box.
Figure 100. Output Building Blocks Dialog Box
1
Output Building Blocks List — Contains building blocks for output channels.
2
Add a Building Block Button — Allows users to create custom building blocks,
saving the currently applied gain and processor settings on the selected channel. Click
the icon to open the Add a Building Block dialog box. This allows users to name
the new custom building block and choose the folder to save the block to an existing
folder, or create a new folder.
Figure 101. Add a Building Block Dialog Box
3
Delete a Building Block Button — Deletes the currently selected building block or
building block folder. If default building blocks are deleted, they can be restored from the
Organize Building Blocks dialog box.
4
New Folder Button —Creates a new folder or sub-folder.
5
Building Blocks Help Button — Opens the Building Blocks topic of the
DSPConfiguratorHelp file. This topic contains more information on the different types
of building blocks for inputs and outputs.
figure 99. Accessing Building Blocks on an Output
figure 100. Output Building Blocks Dialog Box
1
Output Building Blocks List
2
Add a Building Block Button
3
Delete a Building Block Button
4
New Folder Button
5
Building Blocks Help Button
figure 101. Add a Building Block Dialog Box