DMP 128 Plus • DSP Configurator Software 52
Fixed Filters Tab
Figure 87. Feedback Suppressor Dialog Box - Fixed Filters Tab
1
Fixed Filters Tab — Provides access to fixed filter configuration options.
2
Fixed Filters List — Displays up to 5 fixed feedback suppression filters.
3
Filter Parameters — Configure the Frequency, Boost/Cut, and Q parameters for
each fixed filter using the text boxes.
4
Single Filter Bypass Button — Bypasses only the filter associated with that filter slot.
When the button is red, the filter is bypassed.
5
Clear All Button — Clears all fixed filters from the list.
6
Bypass FBS Button — Bypasses the FBS processor. When the button is red, FBS is
bypassed.
7
Set Defaults Button — Resets parameters on all tabs to their default values and
positions.
8
OK Button — Confirms changes made to the contained parameters and closes the
Feedback Suppressor dialog box.
9
Cancel Button — Reverts any changes made to the contained parameters back to
their states when the current instance of the Feedback Suppressor dialog box was
opened and closes the dialog box.
¢
Feedback Suppressor Help Button — Opens the Feedback Suppressor topic of
the DSPConfiguratorHelp file for further assistance in understanding and operating the
feedback suppression processor.
Virtual Return Filter Block
One filter block is available for each virtual return channel. This filter block functions the
same as the mic/line input filter block (see Input Filter Block on page26 for information
on configuring the virtual return filter block).
Virtual Return Dynamics Block
One dynamics block is available for each virtual return channel. This block functions the
same as the mic/line input dynamics block (see Input Dynamics Blocks on page32 for
information on configuring the virtual return dynamics block).
1
Fixed Filters Tab
2
Fixed Filters List
3
Filter Parameters
4
Single Filter Bypass Button
5
Clear All Button
6
Bypass FBS Button
7
Set Defaults Button
8
OK Button
9
Cancel Button
¢
Feedback Suppressor Help Button
figure 87. Feedback Supporessor Dialog Box - Fixed Filters Tab