Extron electronics DMP 128 Plus - Device Settings; Unit Info; IP Settings

DMP 128 Plus • Configuration Tools 89
Device Settings
The Device Settings dialog box provides access to general settings of the
DMP128Plus. Select Tools > Device Settings to open the Device Settings dialog
box.
Within the Device Settings dialog box, the following tabs are available:
• Unit Info • IP Settings • Passwords
• Serial Settings • Date/Time • Dante Device
NOTE: Device settings are only available when connected Live to a DMP128Plus.
Unit Info
The Unit Info tab displays the unit name, firmware version, device model, device part
number, and device MAC address. Click in the Unit Name field to rename the device within
the listed naming parameters. Click Apply to save the changes.
Figure 153. Unit Info Tab in Device Settings Dialog Box
IP Settings
The IP Settings tab allows the user to view and edit the IP address, gateway IP address,
subnet mask, and DHCP status of the unit. The checkbox to the left of each parameter
must be checked before any changes can be made to that parameter. Click Apply to save
the changes.
NOTE: Changing DHCP from On to Off resets the IP address to the factory default
(192.168.254.254).
Figure 154. IP Settings Tab in Devices Settings Dialog Box
figure 153. Unit Into Tab in Device Settings Dialog Box
figure 154. IP Settings Tab in Device Settings Dialog Box