DMP 128 Plus • Configuration Tools 88
1
Export Building Blocks File Button
4
Restore Default Building Blocks Button
2
Import Building Blocks File Button
5
New Folder Button
3
Delete Building Block Button
6
Building Blocks Panel
Figure 152. Organize Building Blocks Dialog Box
1
Export Building Blocks File Button — Click the button to export the selected
building block file to be saved to a disk.
NOTE: Building block files have an XML extension.
2
Import Building Blocks File Button — Click the button to browse the computer
for building block files to import to DSP Configurator.
3
Delete Building Block Button — Click the button to delete the currently selected
building block.
4
Restore Default Building Blocks Button — If default building blocks that come
installed with DSP Configurator are deleted, click the button to restore them.
NOTE: Only the default building blocks can be restored with this function. User
created building blocks are not restored if deleted.
TIP: To avoid accidentally deleting user created building block files, once they are
created, export them to a safe location on the disk. This creates a backup copy of
the building block file, should it be deleted by the user by mistake.
5
New Folder Button — Click the button to create a new folder that building blocks
can be dragged into. Upon creation, a default folder name is highlighted and a custom
name can be entered. Click a folder name twice to edit the folder name.
6
Building Blocks Panel — This panel contains folders and building blocks. Click and
drag building blocks to change their order or place them inside folders. Click a building
block name twice to edit the building block name. Click a folder name twice to edit the
name of the folder.
figure 152. Organize Building Blocks Dialog Box
To Next Page
Loading...
