Extron electronics DMP 128 Plus - Aux Input Dynamics Block; Aux Input Ducking Block; Aux Input Automix Block; Aux Input Pre-Mixer Gain Block

DMP 128 Plus • DSP Configurator Software 47
Aux Input Dynamics Block
Two dynamics blocks are available for each Aux input. These blocks function the same
as the mic/line input dynamics blocks (see Input Dynamics Blocks on page32 for
information on configuring the Aux input dynamics blocks).
Aux Input Ducking Block
One ducking block is available for each Aux input. This block functions the same as the
mic/line input ducking block (see Input Ducking Block on page38 for information on
configuring the Aux input ducking block).
Aux Input Automix Block
One automix block is available for each Aux input. This block functions the same as the
mic/line input automix block (see Input Automix Block on page40 for information on
configuring the Aux input automix block).
Aux Input Pre-Mixer Gain Block
The Aux input pre-mixer gain block functions the same as the mic/line input pre-mixer gain
block (see Input Pre-Mixer Gain Block on page42 for information on configuring the
Aux input pre-mixer gain block).
Virtual Returns
Virtual returns receive signal when inputs are routed to the virtual send bus (see figure 92
on page 55). Sixteen virtual return channels are available and are labeled A through P.
These channels can be used in a number of applications. For example, they can act as an
AEC reference channel or be used for sub-mix processing.
Figure 80. Virtual Returns Input Panel
figure 80. Virtual Returns Input Panel