DMP 128 Plus • DSP Configurator Software 38
Input Ducking Block
The duck block contains a ducking processor as well as an adaptive gain processor.
• Ducker (see the next page) — Decreases levels on specified channels when signal is
present above a set threshold on the duck source (trigger).
• Adaptive Gain (see page 40) — Increases levels on specified channels when signal
is present above a set threshold on the adaptive gain source channel (trigger).
Double-click the Duck block to open the drop-down menu where the Ducker and Adaptive
Gain processors can be selected.
Figure 63. Duck Block and Drop-Down Menu
Select Ducker to insert a ducking processor into the duck block. Select Adaptive Gain
to insert an adaptive gain processor into the duck block. Depending on the processor
selected, the duck block displays DUCK for a ducker or AG for adaptive gain.
Figure 64. Ducking Block Icons
If a ducking processor has been inserted and needs to be changed to a an adaptive gain
processor, or vice versa, right-click the block and hover over Insert to insert a different
processor (see figure 65 below).
Figure 65. Changing Ducking Processor
figure 63. Duck Block and Drop Down Menu
figure 64. Duck Block Icons
figure 65. Changing Ducking Processor
To Next Page
Loading...
